Multi-level joint covering profiles (thresholds)

Joint covering profiles made of stainless steel and brass are used for decorative joint finishing of the different surface types with height difference from 6 to 15 mm in interior and exterior finishing of buildings and constructions.

This type of product protects the joints of two similar or different floor coating building and its premises against abrasion, deformation and fracture.

Joint covering profiles will prevent the moisture and dirt from getting into the joints between the materials on the outside surfaces, and will give the surface joint a finished aesthetic look.

Size range:

C1 height difference up to 9 mm.

C2 height difference up to 12 mm

Profile length is 900, 1800, 2700 mm.

The protective corner is mounted with the screws into the prepared holes in advance. When mounting the profile on the outside surfaces it is recommended to use an additional sealant.